Decided to add a little lighting to make setup/troubleshooting a little easier. Just so happens the controller has some “other” features too! https://youtu.be/T1KuLOCLdys

Experimenting with the Octopus. Just for fun, made web pages and could switch presets with my phone. 😏 https://youtu.be/De1LCQvbqV4

(Top temp – 66.5 – normal temp after fan replacement. Rose to 92 with bad fan.) Three or so years ago, I had to replace a fan on the Broadcast Pix Granite BOB. It was challenging to find a replacement fan since it uses 5V and Radio Shack is a thing of the past. Computer replacement fans use 12V. Now the same fan needs replaced again! Luckily, the electronics landscape has changed with the popularity of Raspberry PIs and Arduinos. Finding a replacement was easy, local and in stock. Show saver. https://youtu.be/OjyZKfdwlng

Time for some power distro maintenance. Just tightening lugs and inspecting wires. Keep those projectors humming. https://youtu.be/_BRv9wGf5pk